8035-Digital Flow Transmitter

Brand: Burkert Fluid Control Systems

The flow transmitter is specially designed for use in neutral, slightly aggressive, solid free liquids. The transmitter is made up of a compact fitting with paddle wheel (S030) and an electronic module (SE35) quickly and easily connected together by a Quarter-Turn. 

The Burkert designed fitting system ensures simple installation of the sensors into all pipes from DN06 to DN65. 

The device is available in different models:
  • Flow transmitter with standard output signal
  • Battery powered
Features
  • Compact version for DN06 to DN65
  • Displays both flow rate and volume (with two totalizers)
  • Automatic calibration: Teach-In
  • Simulation: All output signals provided without the need for real flow

Specifications

Accuracy

  • 4-20 mA Output Uncertainty: ± 1 %

Ambient Temperature Range

  • Operation & Storage: 0° to 50° C (32° to 122° F) (115/230 Vac Version)
  • Operation & Storage: 0° to 55° C (32° to 131° F) (Batteries Version)
  • Operation & Storage: 0° to 60° C (32° to 140° F) (12-36 Vdc)
  • UL Recognized: 0° to 40° C (32° to 104° F)

Approvals & Certifications

  • Safety: EN 61010-1
  • CE
  • EMC: EN 61000-6-2, EN 61000-6-3
  • PED 2006/95/CE
  • UL (C,US): UL 61010-1 + CAN/CSA C22.2 No. 61010-1

Bearing Material

  • Ceramics

Consumption

  • Current (Transmitter with Relays): ≤ 70 mA at 12 Vdc
  • Current (Transmitter without Relay): ≤ 25 mA at 12 Vdc

Cover Material

  • Polycarbonate (PC)

Current

  • Fuse 125 mA - Max.

Diameter

  • Pipe: 1/4 to 2-1/2” (DN06 to DN 65)

Display

  • 15 x 60 mm, 8-Digit LCD, Alphanumeric, 15-Segments, 9 mm High

Electrical Connectors

  • 50 metres, Max.
  • Battery Version: Cable Glands M20 x 1.5
  • Battery Version: Cable Plug EN 175301-803
  • Shielded Cable with 1.5 mm², Max.

Enclosure, Body Material

  • Polycarbonate (PC)

Environmental Protection

  • IP65

Gland Material

  • Polyamide (PA)

Humidity

  • ≤ 80 % Relative Humidity, Non-Condensing
  • UL Recognized: Max.

Indication

  • LED

Linearity

  • ± 0.5 % of Full Scale

Loop Impedance

  • 50 ohms at 12 Vdc, Max.
  • 600 ohms at 24 Vdc, Max.
  • 800 ohms with a 115/230 Vac, Max.
  • 900 ohms at 30 Vdc, Max.

Materials of Construction

  • Front Panel Foil: Polyester
  • Lid: Polycarbonate (PC)

Measuring Error

  • Measurement Deviation (Standard K-factor): ± 2.5 % of Reading
  • Measurement Deviation (Teach-In): ± 1 % of Reading

Measuring Range

  • 0.3 to 10 m/sec

Nut & Bolt Material

  • Nut: Polycarbonate (PC)

Output

  • Pulse: 2.5 Vdc at 100 mA
  • Pulse: 5-36 Vdc
  • Standard Signal Version (3-Wire with Relays, 2-Wire without Relay): 4-20 mA

Pipe Connection

  • DN 15 Pipe
  • DN 20 Pipe
  • DN 25 Pipe
  • DN 32 Pipe
  • DN 40 Pipe
  • DN 50 Pipe
  • DN 65 Pipe

Plug Material

  • Cable Plug: Polyamide (PA)

Power

  • 3 VA

Power Supply

  • Battery Indicator/Totalizer Version: 4 x 1.5 Vdc Non-Rechargeable Alkaline AA Batteries
  • Standard Signal Version: 115/230 Vac at 50/60 Hz
  • Standard Signal Version: 12-36 Vdc ± 10 %

Pressure Range

  • bar: 0 to 16
  • kPa: 0 to 1,600
  • psi: 0 to 232.16

Process Temperature

  • PP: 0° to 80° C (32° to 176° F)
  • PVC: 0° to 50° C (32° to 122° F)
  • PVDF, Brass or Stainless Steel: -15° to 100° C (5° to 212° F)

Relay Output

  • 2 Relays
  • 230 Vac / 3 A
  • Resistive Load: 40 Vdc / 3 A
  • UL Recognized: 30 Vac
  • UL Recognized: 42 V Peam, Max.
  • UL Recognized: 60 Vdc, Max.

Repeatability

  • ± 0.4 % of Reading

Reverse Polarity Protection

  • Yes

Screw Material

  • Stainless Steel

Seat / Seal Material

  • Seal: EPDM
  • Seal: FKM

Shock

  • EN 60068-2-27

Supply Voltage

  • 27 Vdc Regulated

Tri-Clamp Connection

  • DN 15 Tri-Clamp
  • DN 20 Tri-Clamp
  • DN 25 Tri-Clamp
  • DN 32 Tri-Clamp
  • DN 40 Tri-Clamp
  • DN 50 Tri-Clamp
  • DN 65 Tri-Clamp

Vibration

  • EN 60068-2-6

Viscosity

  • 300 cSt, Max.

Welded Connection

  • DN 15 Weld End
  • DN 20 Weld End
  • DN 25 Weld End
  • DN 32 Weld End
  • DN 40 Weld End
  • DN 50 Weld End
  • DN 65 Weld End

Wetted Materials

  • Axis: Ceramics
  • Fitting, Sensor Armature, Paddle-wheel: PVDF
  • Fitting, Sensor Armature: 316L Stainless Steel, 1.4404
  • Fitting, Sensor Armature: Brass
  • Fitting, Sensor Armature: Polypropylene (PP)
  • Fitting, Sensor Armature: PVC

show more