Images are representations only.
Appleton™ CPS Factory Sealed 20 Amp Pin and Sleeve Receptacles
Brand: AppletonCPS Factory Sealed 20 Amp Pin and Sleeve Receptacles feature delayed action construction.
They provide explosionproof protection for stationary or portable equipment in hazardous, damp or corrosive locations.
The CPS series is certified for use in Class I, Division 1 and 2 Groups B, C, D locations.
Features- Factory sealed: external seals not required
- CPS Series plug and receptacles are supplied with pressure terminal connectors
- Delayed action construction. Insert plug partially rotate slide on front of receptacle and insert plug fully
- Energizes receptacle terminals deeply recessed to prevent accidental touching
- Insulators provide superior dielectric and mechanical strength and lowest arc tracking
- Plug mechanical cable clamps prevent strain on cables; they meet or exceed UL strain relief pull-out requirements
- Captive stainless steel hex head slotted screws
Specifications
Brand
Materials & Finishes
- Mounting Body: Malleable Iron with Triple-Coat (1) Zinc Electroplate, (2) Chromate & (3) Epoxy Powder Coat Finish
- Insulating Blocks: Fiber Glass Reinforced Thermoset Polyester
- Cover Gasket & Plug Grommet: Neoprene
- Covers: Copper-Free (4/10 of 1% Max.) Aluminum with Epoxy Powder Coat
Mounting Box Entries
- Dead-End or Feed-Thru
Horsepower Ratings
- 1 HP
Number of Wires
- 2
Number of Poles
- 3
Amperage
- 20 A
Plug Cable Diameter
- 0.538" - 0.639”
NEC/CEC Certifications and Compliances
- UL Standard: UL 1010 (UL 1203)
- UL Listed: E10784, E81751
- CSA Standard: C22.2 No. 25, C22.2 No. 30, C22.2 No. 159
- CSA Certified: 038644
Voltage
- 125-250 Vac or 18 Vdc
