Images are representations only.
2865 2/2-Way Solenoid Control Valve
Brand: Burkert Fluid Control Systems
Type 2865 is an extremely compact solenoid control valve and is available with an orifice up to 8 mm. It is based on the standard version of Type 2875. It is used as an actuator in closed control loops (pressure, flow, temperature, etc.).
Compared with the standard version, the valve is essentially of simpler construction and assembly and testing procedures are optimized, easing high volume series production with shorter delivery times.
Valve control takes place through a PWM signal. The duty cycle of the PWM signal determines the coil current and hence the position of the plunger.
The Bürkert control electronics Type 8605 converts an Analog signal to a reference value corresponding to the valve type PWM signal and provides additional functions such as temperature compensation (coil heating), ramp function and the adjustment of minimum and maximum duty cycle/coil current for the control range.
Features- Made for custom engineered applications
- Orifice sizes DN 2 to 8 mm
- Port connection 3/8", 1/2” or customer specific
Specifications
Ambient Temperature Range
- 55° C (131° F) - Max.
Approvals & Certifications
- ATEX - II 2 G EEx M II T4 or T6
- IECEx - Ex E Mb IIC T6 Gb
BSP Connection
- G 1/2” Female
- G 3/8” Female
Consumption
- Power: 16 W
Current
- 750 mA (At 24 V Hold) - Max.
Duty Cycle
- 100 % Duty Cycle Continuous Rating
Electrical Connectors
- Cable Plug Typical 2508
Electrical Contacts
- Normally Closed
Enclosure, Body Material
- Brass
- Stainless Steel
Environmental Protection
- IP65
Flow Rate
- 129 to 1,186 QNn (L/min)
- Water: 0.12 to 1.10 Kvs (m³/hour)
Frequency
- PWM Control Frequency: 280 Hz
Hysteresis
- < 5 %
Media
- Neutral Gases & Liquids
Mounting Position
- Preferably with Actuator Upright
Nominal Pressure
- psi: 0 to 362.6 (kPa: 0 to 2,500, bar: 0 to 25)
NPT Connection
- 1/2” NPT Female
- 3/8” NPT Female
Orifice Size
- 0.07” to 0.31” (2 to 8 mm)
Power Supply
- 24 Vdc
Pressure Range
- psi: 0 to 362.6 (kPa: 0 to 2,500, bar: 0 to 25)
Process Temperature
- -10° to 90° C (14° to 194° F)
Ratio
- Span - 1:25
Repeatability
- < 1 % of Full Scale
Seat / Seal Material
- Seal: EPDM
- Seal: FKM
Sensitivity
- < 1 % of Full Scale
Solenoid Type
- 2/2-Way
