Images are representations only.
Jamesbury Figure 1075 Shut-Off & Firesafe Valve
Brand: ValmetThe JAMESBURY brand FM (Factory Mutual) approved Emergency Shutoff and Firesafe Valves Figure 1075 are manual assemblies consisting of the JAMESBURY FIRE-TITE valves and the JAMESBURY TORQ-HANDLE.
These assemblies provide automatic closure of a normally open valve in the event of a fire or excessive temperature.
These assemblies are used for all types of media including flammable gases, liquids, and toxic fluids.
Figure 1075 assemblies carry FM approval as Firesafe Valves, specifically designed for flammable liquid service. To meet the requirements of this category, the JAMESBURY FIRE-TITE valves have been tested and qualified to resist direct exposure typical of uncontrolled fire for at least 15 minutes.
Included in the line of Figure 1075 Emergency Shutoff Valve assemblies are 1/2" to 1" (DN 15-25) Series 7150 flanged ball valves and 1" to 2" (DN 25-50) ELIMINATOR Series screwed-end ball valves equipped with TORQ-HANDLE spring-return handles and a choice of fusible links for specific temperature requirements.
Specifications
Brand
Approvals & Certifications
- Hydrostatic Pressure Test
- CSA - Class I, Groups C, D, & 9 Class II Groups E, F, G Div. 1 & 2
- FM
Electrical Contacts
- Normally Closed
- Normally Open
Electrical Rating
- Switch Rating (DPDT): 4.5 A at 125/250 Vac
- Switch Rating (SPDT): 10 A at 125/250 Vac
Enclosure, Body Material
- 316 Stainless Steel
- Carbon Steel (A216 WCB)
Environmental Protection
- IP66
- IP67
- NEMA 4
- NEMA 4X
- NEMA 6
- NEMA 7
Flange Size - 1” (DN 25)
- 1” (DN 25) - 150# ANSI
Flange Size - 1/2” (DN 15)
- 1/2” (DN 15) - 150# ANSI
Flange Size - 3/4” (DN 20)
- 3/4” (DN 20) - 150# ANSI
Flow Rate
- 13 to 111 Cv
- 9 to 45 Cv - Series 7150 Valve
Media
- Flammable Gas
- Liquids
- Toxic Fluids
- Water
Operating Pressure
- psi: 1,440 (kPa: 9,900, bar: 99) - Stainless Steel (ANSI)
- psi: 1,480 (kPa: 10,200, bar: 102) - Carbon Steel (ANSI)
- psi: 2,000 (kPa: 13,800, bar: 138) - Carbon Steel, Stainless Steel (CWP)
Pressure Drop
- psi: 1 (kPa: 6.9, bar: 0.69)
Proof Pressure
- Test - psi: 275 to 425 (kPa: 1,900 to 2,900, bar: 19 to 29) Accordance with ASME B16-34-2004 - 316 Stainless Steel
- Test - psi: 285 to 450 (kPa: 1,960 to 3,000, bar: 19.6 to 30) Accordance with ASME B16-34-2004 - Carbon Steel
Seat / Seal Material
- Seat: PTFE
- Seat: XTREME
Switch Type
- DPDT
- SPDT
Temperature Range
- -29° to 250° C (-20° to 500° F)
Trim Material
- 316 Stainless Steel
Valve Size
- 1/2” to 2” (15 to 50 mm)
Valve Type
- Manual
