Images are representations only.
S030 In-Line Sensor-Fitting with Paddle Wheel
Brand: Burkert Fluid Control Systems
The sensor-fitting S030 has a built-in paddle wheel to measure the flow rate. When liquid flows through the pipe, the paddle wheel is set in rotation producing pulses which frequency is proportional to the flow rate.
The Burkert ”INLINE Quarter-turn” technology is a construction ensuring a leakage free operation. The paddle wheel rotation (permanent magnets included in the wheels) is detected contactless through the sensor-fitting wall. The transmitter can be snapped-on or removed without opening the pipe or interrupting the process.
Features- DN06 to DN65
- Closed pipe system, sensor inside fitting
- Quarter-turn technology
- Transmitter available for:
- Indication, Monitoring, Transmitting
- On/Off control, Batch control
Specifications
Ambient Temperature Range
- Operating & Storage (For Sensor-fitting in PP): -15° to 80° C (5° to 176° F)
- Operating & Storage (For Sensor-fitting in PVC): -15° to 60° C (5° to 140° F)
- Operating & Storage (For Sensor-fitting in Stainless Steel, Brass or PVDF): -15° to 100° C (5° to 212° F)
Approvals & Certifications
- FDA
- PED 2014/68/EU
Approvals & Certifications
- 3-Points Flow Calibration Certificate
- Certification of Conformity for the Surface Quality (DIN 4762-DIN 4768-ISO /4287/1)
- Inspection Certificate 3.1 (According to EN-ISO 10204)
- Test Report 2.2 (According to EN-ISO 10204)
Bearing Material
- Ceramics (Al₂O₃)
BSP Connection
- G 1” Female
- G 1” Male
- G 1/2” Female
- G 1/2” Male
- G 1/4” Male
- G 1-1/2” Female
- G 1-1/2” Male
- G 1-1/4” Female
- G 1-1/4” Male
- G 2” Female
- G 3/4” Female
- G 3/4” Male
- 1” BSPT Female
- 1/2” BSPT Female
- 1/2” BSPT Male
- 1-1/2” BSPT Female
- 1-1/4” BSPT Female
- 2” BSPT Female
- 3/4” BSPT Female
Diameter
- Pipe: 1/4 to 2-1/2” (DN06 to DN 65)
Enclosure, Body Material
- 316L Stainless Steel, 1.4404
- Brass (CuZn₃₉Pb₂)
- Polypropylene (PP)
- PVC
- PVDF
Flange Size - 1-1/2” (DN 40)
- 1-1/2” (DN 40) - JIS 10K (ANSI B16-5)
- 1-1/2” (DN 40) - PN 16 (EN 1092-1/B1)
Flange Size - 1-1/4” (DN 32)
- 1-1/” (DN 32) - JIS 10K (ANSI B16-5)
- 1-1/4” (DN 32) - PN 16 (EN 1092-1/B1)
Flange Size - 1” (DN 25)
- 1” (DN 25) - JIS 10K (ANSI B16-5)
- 1” (DN 25) - PN 16 (EN 1092-1/B1)
Flange Size - 1/2” (DN 15)
- 1/2” (DN 15) - JIS 10K (ANSI B16-5)
- 1/2” (DN 15) - PN 16 (EN 1092-1/B1)
Flange Size - 2” (DN 50)
- 2” (DN 50) - JIS 10K (ANSI B16-5)
- 2” (DN 50) - PN 16 (EN 1092-1/B1)
Flange Size - 3/4” (DN 20)
- 3/4” (DN 20) - JIS 10K (ANSI B16-5)
- 3/4” (DN 20) - PN 16 (EN 1092-1/B1)
Flow Rate
- 0.3 to 10 m/sec
Linearity
- ± 0.5 % of Full Scale
Materials of Construction
- Paddle Wheel: Polypropylene (PP)
- Paddle Wheel: PVDF
- Paddle Wheel: Stainless Steel
Measuring Error
- Standard K-factor: ± 2.5 % of Reading
- Teach-In (Via A Remote Transmitter): ± 1 % of Reading
Measuring Range
- 0.5 to 1,200 L/minute
Media
- Neutral
- Slightly Aggressive
- Solid-free Liquids
NPT Connection
- 1” NPT Female
- 1/2” NPT Female
- 1/2” NPT Male
- 1/4” NPT Male
- 1-1/2” NPT Female
- 1-1/4” NPT Female
- 2” NPT Female
- 3/4” NPT Female
Pipe Connection
- DN 15 Pipe
- DN 20 Pipe
- DN 25 Pipe
- DN 32 Pipe
- DN 40 Pipe
- DN 50 Pipe
- DN 65 Pipe
- DN 8 Pipe
Pressure Range
- bar: 0 to 16
- kPa: 0 to 1,600
- psi: 0 to 232.16
Process Connection Material
- 316L Stainless Steel, 1.4404
- Brass (CuZn₃₉Pb₂)
- Metal
- Only DN 6 & DN 8: PVC
- Only DN 8: PVDF
- Plastic
Process Temperature
- Sensor-fitting in PP: 0° to 80° C (32° to 176° F)
- Sensor-fitting in PVC: 0° to 50° C (32° to 122° F)
- Sensor-fitting in Stainless Steel, Brass or PVDF: -15° to 100° C (5° to 212° F)
Repeatability
- ± 0.4 % of Reading
Screw Material
- 316L Stainless Steel, 1.4404
Seat / Seal Material
- Seal: EPDM
- Seal: FKM
Shaft Material
- Ceramics (Al₂O₃)
Tri-Clamp Connection
- DN 15 Tri-Clamp
- DN 20 Tri-Clamp
- DN 25 Tri-Clamp
- DN 32 Tri-Clamp
- DN 40 Tri-Clamp
- DN 50 Tri-Clamp
- DN 65 Tri-Clamp
- DN 8 Tri-Clamp
Viscosity
- 300 cSt
Welded Connection
- DN 15 Weld End
- DN 20 Weld End
- DN 25 Weld End
- DN 32 Weld End
- DN 40 Weld End
- DN 50 Weld End
- DN 65 Weld End
- DN 8 Weld End
