Images are representations only.
Appleton™ EY 40% Fill Expanded Fill Sealing Fittings for Close Turning Radius
Brand: Appleton
Appleton™ EY 40% fill expanded fill sealing fittings, for close turning radius, prevent the passage of gases, vapors or flames from one portion of a conduit system to another.
They also restrict large amounts of ignitable gases or vapors from accumulating to confine explosive pressure.
Appleton sealing fittings are explosionproof, dust-ignitionproof and raintight.
They are suitable for use in Class I and II locations.
Features- Explosionproof, dust-ignitionproof, raintight
- Prevent passage of gases, vapors or flames from one portion of conduit system to another. Restrict any explosion to the sealed off enclosure. Prevent pressure piling within conduit system
- Required in Class I, Division 1 and 2 locations within 18" of enclosures containing apparatus that may cause arcs, sparks or high temperatures
- Required in Class I, Division 1 and 2 locations where 2" or larger conduit enters enclosure, fitting housing terminals, splices or taps
- Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location
- Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36" or less conduit. Seal must be located within 18" of either enclosure
- Required where cables (which exceed rate of gas or vapor transmission permitted for seals) are used in Class I, Division 2 locations
- Smooth, rounded integral bushing in each hub protects conductor insulation
- Accurately tapped, tapered threads for tight, rigid joints and ground continuity
- Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
- UL Listed for use with Kwiko™ A Sealing Compound. Also listed with certain competitors sealing cement, contact factory for details
- Allow up to 40% conduit fill in compliance with the National Electrical Code
Specifications
Brand
Standard Material
- Almag 35 Aluminum
- Malleable Iron
Standard Finish
- Triple-Coat Finish (1) Zinc Electroplate, (2) Chromate, & (3) Epoxy Powder Coat
- Epoxy Powder Coat
NEC/CEC Certifications & Compliances
- Class I, Div. 1 & 2, Groups A, B, C, D, Class II, Div. 1 & 2, Groups E, F, G, Class III
