Images are representations only.
8072 Positive Displacement Flowmeter
Brand: Burkert Fluid Control Systems
This positive displacement flowmeter/threshold detector with display is designed for use in slighly viscous fluid like glue, honey or oil and specially to switch a valve and to establish a monitoring system or an On/Off control loop. The switching points can be configured with the 3-keys below the display.
The 8072 is available with On/Off output, or with process value outputs.
Features- Indication, monitoring, transmitting and On/Off control in one device
- Selectable outputs (transistor or relay)
- Automatic calibration: Teach-In
- Process value output: 4-20 mA
Specifications
Accuracy
- ± 1 % of Reading
Ambient Temperature Range
- Operating & Storage: 0° to 60° C (32° to 140° F)
Approvals & Certifications
- Security: EN 61010-1
- EMC: EN 61000-6-2, EN 61000-6-3
- UL (C,US): UL 61010-1 + CAN/CSA C22 No.61010-1
Cable Length
- 328.1 feet (100 metres) - Max.
Consumption
- Current: ≤ 90 mA (without Load)
Cover Material
- Glass Fibre Reinforced
Diameter
- Pipe: 1/2 to 4” (DN 15 to DN 100)
Display
- 8-Digit LCD with Backlighting
Electrical Connectors
- 0.5 mm², Max.
- 5-Pin or Male M12 Connector
- 8-Pin
- Cable Plug According to EN 175301-803
- Free Positionable Male M12 Connector
- Shielded Cable
Enclosure, Body Material
- Polycarbonate (PC)
Environmental Protection
- IP65
Frequency
- Output (Transistor): 0 to 300 Hz
Humidity
- ≤ 80 % Relative Humidity, Non-Condensing
Loop Resistance
- 1,000 ohms at 30 Vdc
- 1,300 ohms at 36 Vdc
- 200 ohms at 12 Vdc
- 450 ohms at 18 Vdc
- 700 ohms at 24 Vdc
Materials of Construction
- Connector M12: Polyamide (PA)
- Front Panel Folio: Polyester
Measuring Range
- 5 MPa.s: 2 to 1,200 L/minute
Operating Voltages
- 12-36 Vdc ± 10 %, Filtered & Regulated
Output
- 4-20 mA
- Transistor (NPN): 0.2-36 Vdc
- Transistor (NPN): 700 mA - Max.
- Transistor (PNP): 500 mA - Max.
Output Format
- Transistor: Open Collector
Plug Material
- Cable Plug: Polyamide (PA)
Pressure Range
- bar: 0 to 55
- kPa: 0 to 5,500
- psi: 0 to 798
Process Temperature
- Fitting in Aluminum: 0° to 80° C (32° to 176° F)
- Fitting in Stainless Steel: 0° to 100° C (32° to 212° F)
Relay Output
- 3 A at 30 Vdc
- 3 A at 48/250 Vac
Repeatability
- ≤ 0.03 % of Reading
Reverse Polarity Protection
- Yes
Screw Material
- Stainless Steel
Seat / Seal Material
- Seal: FEP
- Seal: FKM
- Seal: PTFE
Shaft Material
- Stainless Steel
Shock
- EN 60068-2-27
Switch Type
- Transistor (NPN and/or PNP)
Vibration
- EN 60068-2-6
Viscosity
- 5 MPa·s
- 1 Pa·s Max.
Wetted Materials
- Fitting, Rotor: 316F Stainless Steel (1.4401)
- Fitting, Rotor: Aluminum
- Rotor: PPS
