Ambient Temperature Range
Approvals & Certifications
- ATEX: PTB 14-ATEX-2023 x II 2 G Ex Mb IIC T4 Gb II 2D Ex Mb IIIC T1 35° C (95° F) Db, EPS 16-ATEX-1046 x II 2 G Ex Eb Mb IIC T4 Gb II 2D Ex Mb Tb IIIC T130° C (266° F) Db
- Gas Transportation DIN EN 3394-1
- IECEx PTB 14.0049 x Ex Mb IIC T4 Gb Ex Mb IIIC T1 35° C (95° F) Db, 16.0021 x Ex Eb Mb IIC T4 Gb Ex Mb Tb IIIC T130° C (266° F) Db
BSP Connection
- G 1/2” Female
- G 1/4” Female
- G 3/8” Female
- 1/4” BSPT Female
- 3/8” BSPT Female
Cable Material
- Polyolefin Copolymer Crosslinked Electron Beam
Consumption
- Power Consumption (AC): 18-37 VA / W (Hold)
- Power Consumption (AC): 32 to 105 VA (Inrush)
- Power Consumption (AC): 8-18 W (Hold)
- Power Consumption (DC): 10-16 W (Hot Coil)
- Power Consumption (DC): 12-21 W (Cold Coil)
Electrical Connectors
- 3 metres Moulded Cable
- Tag Connector According DIN EN 175 301-803 Form A for Cable Plug Typical 2508
Enclosure, Body Material
- 316L Stainless Steel, 1.4401
- Brass
Environmental Protection
- Explosion-proof
- IP65 with Cable Plug
- IP66
- NEMA 4X with Cable Plug 2508 or 2509 - Stainless Steel Version
Flow Rate
- Water: 0.6 to 2.2 Kv (m³/hour)
Materials of Construction
- Armature Guide Tube: 305 Stainless Steel, 1.4303
- Coil: Epoxy
- Junction Box: Aluminum
- Safety Lock: Polyphenylene Sulfide
- Stopper, Core: 434 Stainless Steel (1.4113)
Media
- Compressed Air
- Hydraulic Oil
- Neutral Liquids & Gases
- Steam (High Temperature)
- Water
Mounting Position
- Preferably with Actuator Upright
NPT Connection
- 1/4” NPT Female
- 3/8” NPT Female
Nut & Bolt Material
- Nut: 303 Stainless Steel, 1.4305
- Nut: PTFE - Stainless Steel Version
- Nut: Steel (Surface Finish Thick Film Passivated) - Brass Version
Operating Voltages
- 230 V / 50 Hz
- 24 V / 50 Hz
- 24 Vdc
Orifice Size
- 0.236” to 0.472” (6 to 12 mm)
Piston Material
- 303 Stainless Steel, 1.4305
- Brass
- EPDM
- FKM - High Pressure Versions
- PEEK
- PTFE Carbon-Filled - High Temperature, Pressure Versions
- Stainless Steel
Pressure Range
- psi: 0 to 40 (kPa: 0 to 275, bar: 0 to 2.75)
Process Temperature
- EPDM: -30° to 120° C (-22° to 248° F)
- FKM: -10° to 140° C (14° to 284° F)
- PTFE / PEEK (DN 12): -40° to 140° C (-40° to 284° F)
- PTFE / PEEK (DN 6): -40° to 180° C (-40° to 356° F)
Response Time
- Closing: 40 to 100 milliseconds (Pressure Decrease 100 to 10 %)
- Opening: 10 to 40 milliseconds (Pressure Build-Up 0 to 90 %)
Ring Material
- Guide Ring: PTFE Carbon-Filled
- Shading Ring: Copper
- Shading Ring: Silver
Seat / Seal Material
- Seal: EPDM - High Pressure Versions
- Seal: FKM - High Temperature Versions
- Seal: PEEK - High Temperature Versions
- Seal: PTFE - High Temperature Versions
Size
- Coil Size: 1.259” to 1.653” (32 to 42 mm)
Spring Material
- 301 Stainless Steel, 1.4310
Tolerance
- Voltage Tolerance: ± 10 %