Type 2300 Pneumatically Operated 2-Way Angle Seat Control Valve Element

Brand: Burkert Fluid Control Systems

In line with Bürkert’s philosophy for modular valves and sensors the construction of Type 2300 angle-seat valve fulfils tough criteria for process environments. 

Unrivalled cycle life and sealing integrity is guaranteed by the proven self adjusting packing gland. The parabolic trim results in a flow characteristic approximately 35% larger than conventional control valves. 

It is available in either stainless steel on stainless steel or with a durable PTFE seal for tight shut-off. The design enables the easy integration of automation modules whether they are digital electropneumatic positioner or process controller. 

The fully integrated system has a compact and smooth design, integrated pneumatic lines, IP65/67, NEMA Type 4X protection class and superior chemical resistance. This system has been engineered for reliable accurate control in applications where high flow rate is an advantage.
Features
  • Excellent combination of good control characteristic and high flow rate
  • Long service life
  • Control units can be mounted directly without external tubing
  • Stainless steel housing with thread, clamp and weld end connection

Specifications

Environmental Protection

  • IP65/IP67
  • NEMA Type 4X

Certifications & Approvals

  • FDA
  • ATEX/IECEx
  • IEC

Port Connection

  • Threaded, Welded, Clamp

Ambient Temperature

  • -10° to 80° C

Medium Temperature

  • -40° to 230° C

Media

  • Steam, Neutral Gases, Water, Alcohol, Oils, fuels, hydraulic fluids, salt solutions, alkalis, organic solvents, oxygen

Operating Pressure

  • 0 to 25 bar(g)
  • Vacuum Up to -0.9 bar(g)

Pilot Pressure

  • 5.6 to 7 bar(g)

Nominal Diameter

  • DN 10 - 65, NPS 3/8” to 2-1/2”

Nominal Pressure

  • PN 25 (DIN EN 1333), Class 150 (DIN EN 1759)

Enclosure/Body Material

  • Body: Stainless Steel CF3M

Material of Construction

  • Actuator: PPS
  • Cover: Stainless Steel 1.4561 (316Ti)
  • Piston Seal: FKM
  • Spindle Sealing: PTFE V-Rings (Filled), with Spring Compensation
  • Body Seal: Graphite or PTFE
  • Seat Seal: Stainless Steel 1.4571, PTFE or PEEK
show more