Images are representations only.
Appleton™ Intraground™ N1 Series Non-Metallic Circuit Breakers and Enclosures
Brand: AppletonAppleton™ explosionproof, non-factory sealed Intraground™ N1 Series circuit breakers and enclosures provide short circuit protection and a safe disconnect means in a non-metallic design. They provide thermal time delay overload protection for branch circuits for lighting, appliance and motor circuits.
The Intraground™ N1 Series is ideal for use in corrosive atmospheres, they are suitable for use in Class I, Division 1 atmospheres when properly installed with sealing fittings at all conduit entries.
Features- Explosionproof, non-factory sealed. Superior flammability resistance and excellent heat deflection temperature make it ideal for use in refineries, chemical plants, petrochemical plants and other processing plants
- 15, 20, and 30 Amp single pole circuit breakers for 120 Vac operation
- Unique labyrinth-path construction assures flame-tight joint between body and cover. Silicone gasket, specially designed for the labyrinth-path joint, prevents entrance of moisture without interfering with the venting of cooled hazardous gases and vapors
- High strength thermoplastic polyetherimide, together with thick wall (5/16") and sound structural design (rounded corners) provides superior resistance to impact and crushing
- Corrosion-resistant, strong, stainless steel Teflon™ coated hex-head cap screws attach cover and body for approved flame-tight construction
- Operating handle has close-tolerance threaded stainless steel shaft to meet explosionproof requirements. Handle may be locked in ON or OFF position
- Non-metallic construction with metal imbedded grounding grid. No need to install special wires and parts for grounding
- The breaker is mounted on the cover. It is furnished with lead wires for ease of connection
- 1/2" or 3/4" dead-end or feed-thru hubs. Smooth, rounded integral bushing in each hub protects conductor insulation. It is furnished with a 3/4" to 1/2" NPT reducer
- External mounting lugs for ease of installation
- Excellent resistance to ultraviolet light, water and attack by fungi and mold
Specifications
Brand
NEC Certifications & Compliances
- UL Standard: UL 1203
- UL Listed: E59122
Standard Finish
- Coated Nameplates: Mylar™
- Coated Cover Bolts: Teflon™
Standard Material
- Handle: Nylon 6/6
- Cover Bolts: Stainless Steel
- Nameplate: Aluminum
- Body & Cover: 30% Glass-Reinforced Thermoplastic Polyetherimide in A Neutral Color
