Images are representations only.
6126 2/2 & 3/2-Way Rocker Solenoid Valve
Brand: Burkert Fluid Control Systems
The direct-acting rocker solenoid valve, Type 6126, is suitable for general applications in which compressed air, gases or slightly contaminated liquids are to be switched. The medium is in contact exclusively with the housing material and the FKM seals.
The heat input in the medium is minimal, because the housing is separated from the coil by a stainless steel plate.
The valves can be mounted directly or also single or manifold mounted. They are used for dosing, filling, mixing and distributing small quantities of medium.
Features- Valve with isolating diaphragm
- Flexible design for custom manifold assemblies
- High back pressure tightness, excellent cleanability and 100 % duty cycle
- Normally closed, normally open and universal function
Specifications
Ambient Temperature Range
- 55° C (131° F) - Max.
Applications
- Dosing, Filling, Mixing Applications
BSP Connection
- G 1/8” Female
Cable Length
- 1.64 feet (0.5 Meter)
Consumption
- Power: 3.4 W
Diaphragm Material
- EPDM
- FKM
Direct Mount
- Yes
Duty Cycle
- Continuous Rating 100 % Duty Cycle
Electrical Connectors
- 2 FEP Flying Leads
- Cable Plug
Electrical Contacts
- Normally Closed
- Normally Open
Enclosure, Body Material
- Actuator, Fluid: Polyphenylene Sulfide (PPS)
Environmental Protection
- IP40 with Rectangular Plug
- IP65 with Flying Leads or Cable Plug
Flow Rate
- 0.015 m³/hour (Kv) - Water
- Air: 16 QNn (L/min)
Function
- 3/2-Way Valve: Universal
Materials of Construction
- Coil: Epoxide
- Manifold: Aluminum
- Manifold: Polyphenylene Sulfide (PPS)
Media
- Resistant to Neutral Liquids & Gases
Mounting Position
- Preferably with Actuator Upright
Operating Voltages
- 12 Vdc
- 24 Vdc
Orifice Size
- 0.03” (0.8 mm)
Pressure Range
- Vacuum - psi: 0 to 90 (kPa: 0 to 600, bar: 0 to 6)
Process Temperature
- -10° to 55° C (14° to 131° F) - Temperature May Vary Depending on Orifice & Seal Material
Response Time
- Opening, Closing: 25 Millisconds Approximately (Pressure Rise 0 to 10 %, 100 % to 10 %)
Seat / Seal Material
- Seal: EPDM
- Seal: FKM
Solenoid Type
- 2/2-Way
- 3/2-Way
Tolerance
- Voltage: ± 10 %
Viscosity
- 21 mm²/sec, Max.
- Dosing, Filling, Mixing Applications
